Month: November 2013

Hacking a Heating Pad

My wife and I have a heating pad on our bed. In the winter, we turn it on an hour before we go to bed. When we get into bed, we leave it on until we warm up. But if we fall asleep before we turn it down, we’ll wake up a couple of hours later, overheated. Clearly, we need a technological solution.

Heathkit Hack #3: Improving the ET-3300 Breadboard

I use a Heathkit ET-3300 powered breadboard for my prototyping. But setting it up has always been a chore in itself. I need to run wires from the power supplies to the power buses, which is messy (though admittedly not nearly as messy as the rest of the circuit will be) and often add voltage regulators, since the Heathkit’s power supplies of +12V, -12V and +5V are more appropriate to the 1970s than the 2010s. So I made a power distribution board that addresses these problems.